Long range setup £ 20

Recommended for any gun, greatly increase range and accuracy!

• Installation of the 4uantum Friction pro Bucking with 4uantum tensioner and alignment of barrel and hop unit to the gearbox for perfect seal. Recommended to upgrade to a ZCI Precision 6.02mm Steel Inner Barrel (+£30). 

Dr. Stage 1 £60

Recommended for any gun or for the yearly service

• The Gearbox will be disassembled, radiused the front cylinder window, de-greased, correct the AoE and polished piston and tappet plate rails. This will ensure maximum smoothness and longevity of the mechanical parts. The gearbox will then be re-shimmed and greased. 

It is highly recommended to replace the piston with one of our ultimate piston (+£15), the piston head (£10) and the cylinder head (£10) with an Upgraded version to improve longevity. The output FPS will be fined tuned to reach your desired goal using a new spring (+£ 10) or spring spacers. 

Dr. Stage 2 £ 150

Increased trigger response and longevity of the gearbox

• Everything from Stage 1 with the addition of a Perun Hybrid v2 ETU mosfet installation. Maximise the trigger response with a Maxx trigger (+£35) perfeclty calibrated for your needs. Requires all the above recommended parts.

Dr.Stage 3 £ 250

Increase trigger response and longevity ever further thanks to the brushless motor!

• Everything from stage 2 with the addition of a Solink brushless motor, 35k or 40k depending on your desired goal. Recommended to upgrade gears based on ultimate goal (+£25) and of the parts reccommended in the previous stages.

Dr. DSG build package £ 320

The ultimate build! No replica is better than a Dr. DSG!

• Everything from stage 3 with the addition of a DSG gearset. DSG builds require very fine tuning of every aspects of the gearbox and give the best trigger response achievable with an AEG. GBB-like semi auto is possible using brushless motor and mosfet. RPS exceeding 40+ are achievable not compromising the reliability of the replica. Mandatory upgrade of the parts in the previous stages.

Dr. DMR build £ 280

DMRs requires the best precision to return that beautiful long range high precision shot. 

• Everything from stage 3 is included plus mechanical semi-lock to the gearbox. It is highly recommended to add the Long range Setup to benefit from this package.

Dr. PTW service £120

Bring your PTW back to the glorious days!

• The gearbox will be disassembled, cleaned, degreased and verified in every part. Once all components are deedmed in good shape it will be re-greased and assembled. The same applies for the cylinder that will be stripped down, cleaned and all the ORs checked. It will then be regreased and assembled. The hop assembly and barrel will be disassembled, cleaned and reinstalled.

Dr. Recoil Mosfet upgrade £200

The use of a mosfet eliminates the annoying semi lock-up, improves trigger response and guarantees smooth operation and incredible tuning possibilities.  

Dr Recoil Long Range Setup £20

Recommended for any gun, greatly increase range and accuracy!

• Installation of the 4uantum Friction pro Bucking with 4uantum tensioner and alignment of barrel and hop unit to the gearbox for perfect seal. Recommended to upgrade to a ZCI Precision 6.02mm Steel Inner Barrel (+£30). 

Dr Recoil Stage 1 £120

The base for any NGRS enthusiast! 

Improves reliability of your replica

• The Gearbox will be disassembled, radiused the front cylinder window, de-greased, AoE corrected and piston and tappet plate rails polished. This will ensure maximum smoothness and longevity of the mechanical parts. New FPS steel bushings will be installed together with a new spring  to achieve desired FPS. The gearbox will then be re-shimmed and greased. 

Dr Recoil Stage 2 £250

Greatly improves trigger response and reliability of the gun! Bruhsless motor means no motor maintenance, ever!

• Everything from stage 1, plus installation of a Brushless Solink 35k motor and FPS softair reinforced steel rack piston.

Dr Recoil Stage 3 £400

Improves further more the reliability of the replica and ensure maximum airseal

• Everything from stage 2, plus installation of the FPS Softair cylinder head, FPS ball bearing spring guide and Lonex steel gearset. 

Have you got a tight budget? Maybe you have already some upgrades installed in your replica but you want to optimize them?  

Or maybe you have a weird gun that doesn't support an ETU but you'd love to have it? 

Get in touch and i'll be happy to provide support to tailor the solution to your needs!